Product Details:
|
Material: | Mullite | Bulk Density G/cm3 ≤: | 2.0-2.5g/cm3 |
---|---|---|---|
SiC Content (%): | 70-90 | Size: | 230mm*114mm*65/75mm |
Application: | Kinds Of Industry Furnace | Color: | Black And Green |
Advantage: | Long Life | Product Name: | ASC Bricks |
High Light: | Carbon Calciner silicon carbide fire bricks,Mullite silicon carbide refractory bricks,ASC silicon carbide fire bricks |
Carbon Calciner Sic Silicon Carbide Silicon-carbide Aluminum Quality Al2o3 Sic C ASC Brick
The use of magnesium carbon refractory bricks
magnesium carbon refractory brickss refer to carbon-containing magnesia non-burning shaped products used in converter lining, electric furnace lining, ladle slag line, ladle lining and refining outside the furnace, mainly including magnesium carbon refractory bricks, aluminum magnesium carbon refractory bricks and magnesia aluminum carbon brick .
Application of magnesium carbon refractory bricks on converter
magnesium carbon refractory brickss According to the above analysis, the temperature of the furnace mouth and the furnace cap changes drastically, and the slag corrosion is severe. The magnesium carbon refractory bricks with good thermal shock resistance and strong slag resistance should be selected. On both sides of the trunnion, except for the damage caused by blowing, the surface is covered with no protective slag layer, which is difficult to repair. The carbon in the brick is easily oxidized, and high-quality magnesium carbon refractory bricks with good slag resistance and good oxidation resistance should be built. The slag line is in contact with the slag for a long time, and the slag is severely damaged. It is necessary to build a magnesium carbon refractory bricks with excellent slag resistance. The splashing effect of slag and molten steel on the charging side is easy to cause chemical attack, abrasion, erosion and direct impact and erosion when loading scrap steel and molten iron. It should be used with strong slag resistance, high temperature strength and thermal shock resistance. Good magnesium carbon brick. The bottom of the hearth is lighter than other parts, and ordinary magnesium carbon refractory brickss can be used. When the top-bottom composite blowing technology is adopted, especially when the gas such as CO2 and O2 is blown at the bottom, the damage is more serious. High-grade magnesium carbon refractory brickss with good oxidation resistance and thermal shock resistance, high temperature strength and high slag resistance should be selected. According to the characteristics of the furnace body damage, different grades of magnesium carbon refractory brickss are used to form a comprehensive furnace lining.
Brand | MT-12A | MT-12B | MT-12C | MT-14A | MT-14B | MT-14C | |
MgO% | ≥ | 78 | 76 | 74 | 76 | 74 | 72 |
C% | ≥ | 12 | 12 | 12 | 14 | 14 | 14 |
Bulk Density (g/cm3) | ≥ | 2.98 | 2.96 | 2.92 | 3 | 2.96 | 2.95 |
Apparent Porosity % | ≤ | 4 | 5 | 6 | 4 | 5 | 6 |
Cold Crushing Strength (Mpa) | ≥ | 40 | 40 | 35 | 40 | 40 | 35 |
Hot modulus of rupture (1450℃)/Mpa | ≥ | 8 | 7 | 6 | 12 | 10 | 8 |
The technical data pertains to machine pressed standard bricks in compliance with the testing standard. These data are typical approximate guide value. Not to be construed as a binding specification.
Size tolerance ±1.% or 1.5mm whichever is greater.
Magnesia Carbon Bricks with properties of higher values available where applications require the same.
Production Capacity
The company can produce the refractory material products of 178 product brands under eight major series, the annual production capacity is up to 100,000 tons, among them, 60,000 tons of fired products medium-to-high gradly, 20,000 tons of unfired products, 20,000 tons of unshaped refractory materials. The company enjoys the power to engage in import and export trade on its own account, the products find a good sale in Japan, Korea S., Russia, Australia, U.S.A. etc. . Company refractory exported account take advanced position in domestic!
Process Equipment
At present company's equipment level had been equal to that of international large refractory company and detailed showed as followings: On shaping equipment, more than 60 high pressure press(From 260T~1250T),one 24000T Isostatic press; on fire equipment, four ultra-high temperature tunnel furnace and many down-draft furnace; on mold-making equipment, 20 various kinds of lathe, miller, planer and grinder and several heating furnace.
Product Application
The company researches and develops by itself, the developed products are applied in a great deal of fields, among them the First subsidiary factory specializes in manufacturing refractory materials for building industry (glass, cement), the Second subsidiary factory specializes in manufacturing refractory materials for metallurgy(nonferrous and ferrous). Meanwhile, the third subsidiary factory(Wuxi Xinwei Pan-Asia High-temperature Ceramics Co., Ltd) got the approval of domestic and international numerous users as the development and application on the material products in the petrochemical industry, power industry.
Research and Development
Our company has first-class products scientific research monitoring centers, the company is supported by domestic scientific research universities and colleges, have obtained considerable development in a great deal of respects of developing and using.
The products sell well at home and abroad, and we have a group of new and old customers mainly from internationally renowned companies such as OSRAM from Germany, LG from South Korea, and GE from the United States, and have established a solid cooperative relationship.
Contact Person: Cathy
Tel: 13901538890
Fax: 86-510-87459052